H20 Timber Beam Edge Protection System, you won’t want to miss.
H20 Timber Beam is everywhere in formwork systems. APAC can now offer a range of H20 Timber Beam Edge Protection system products specifically designed to meet the challenges of safe working at height with formwork systems.
APAC has designed and manufactured the innovative H20 timber beam clamp. For securely fixing beams and cornices to timber and timber formwork. The H20 Timber Beam Clamp Edge Protection System is the perfect formwork edge protection solution.
The special H20 beam clamp locks onto the upper surface of the proprietary timber formwork beam. This provides sockets or other means of clamping vertical safety posts.
These H20 beam clamps can be pre-fixed to the formwork beam during initial formwork installation and can be kept in place during formwork or table movement. The H20 Beam Clamp Edge Protection System provides protection during all phases of formwork use.
When you install the H20 Timber Beam Clamp Edge Protection system, the brackets must be mounted centrally enough to withstand the forces exerted on the posts through the mesh barrier or handrail due to wind and handrail loads.
When Building edge protection systems on H20 Beams, the operators must wear a suitable harness and lanyard. These harnesses and lanyards need to be checked and then fixed to the appropriate points in the structure.
Before installing the Safety H20 Beam Clamp Edge Guard, check that the webs and ends of the beams are not damaged or deformed. Once the beams are securely fastened to the scaffold/formwork structure, the H20 Beam Clamps can be fixed. The center of the Beam Clamps should be at least 150 mm from the end of the beam.
The horizontal spacing of the H20 Beams is 2.4m and the H20 Beams should only be fixed to the beam at right angles to the direction of the mesh barrier.
APAC provides complete solutions for formwork edge protection in construction, the system strictly complies with BS EN 13374, OSHA 1926.502, AS/NZS 4994.1 Standards.
The Beam bracket can be clamped to both primary or secondary beams, it provides enough support to the safety post and mesh guard. As a result, the edge protection system on the H20 beams can provide enough strength to protect the workers and materials from falls.
APAC can provide you with free design services, drawings, and calculations for the H20 Beam Clamp Edge Protection System and also offers advanced 3D drawings.
We offer you the H20 Beam Clamp edge protection including a complete working access platform with handrail systems. The lightweight of our H20 Beam Clamp Edge Protection system means that transport costs are significantly lower. If required, we can deliver everything to your site from China directly.
APAC offers you one-stop solutions for leading-edge, fall protection, fall prevention, and H20 Timber Beam edge protection systems. You can work with us to help you keep your work zone safe and secure. Can’t find what you’re looking for, contact us now!