OEM & PRIVATE LABEL
OEM & Private Label Edge Protection Solutions
Develop an edge protection product range built around your market, brand and customer requirements.
APAC supports edge protection brands, specialist distributors and rental operators with product customization, private labeling, RAL colours, drawings, 3D models and customer-specific product development. Whether you need to brand an existing system or develop a product from your own drawing or requirement, our team can support the process from initial review through sample development and repeat production.
Since 2014
Construction safety supply
30+
Countries supplied
OEM / ODM
Product development support
3D
Drawing and modelling support
CUSTOMISATION OPTIONS
What Can Be Customised?
OEM does not always mean developing a completely new product. Depending on your business model, customisation can range from private labeling and colour selection to product dimensions, components and customer-specific system development.
BRANDING
Logo & Product Identification
Add your brand identity through customer-specific stickers, markings, spraying and other agreed product-identification methods.
FINISH
RAL Colours & Surface Finish
Select colors to match your product range, branding, or identification requirements, including customer-specified powder-coated finishes where applicable.
PRODUCT
Dimensions & Product Configuration
Existing systems and components can be reviewed against customer drawings, target applications and required dimensions to determine an appropriate custom solution.
DEVELOPMENT
Customer-Specific Product Development
Bring us an existing product, drawing, concept or application requirement and our team can review the information before discussing drawings, samples and production.
CHOOSE YOUR STARTING POINT
Start With an Existing System or Develop Something Different
The right development route depends on how much of the product has already been defined before you contact APAC.
OEM / PRIVATE LABEL
Start With an Existing Product
Suitable when the basic product or system already meets your requirements but you need your own branding, colour, identification or agreed product modifications.
This route is typically more straightforward because the starting product and application are already defined.
ODM / CUSTOM DEVELOPMENT
Start With Your Requirement or Drawing
Suitable when you have your own concept, drawing, reference product or application requirement and need APAC to support product development before production.
Additional drawing review, modelling, samples or verification may be required depending on the extent of the change.
DEVELOPMENT PROCESS
From Your Requirement to Repeat Production
A structured development process helps turn your product requirement, drawing or reference sample into a clearly defined product that can be reviewed before production and reproduced for future orders.Define the Product Before We Produce It
OEM and ODM projects can start from very different points. You may already have a finished drawing, an existing product that needs modification, a physical sample or simply an application requirement. Our first objective is to understand exactly what needs to be made and agree on the product configuration before moving into repeat production.- Review your drawings, samples or product requirements
- Confirm dimensions, configuration and customisation details
- Use drawings, 3D models or samples where further verification is required
- Establish a confirmed product basis for production and future repeat orders
How the Development Process Works
The exact process may vary depending on the product and level of customisation, but a typical OEM or ODM project follows these six stages.
01
Requirement Review
Share your product concept, drawing, reference sample, target application, specifications and market requirements.
02
Product Definition
We review the required dimensions, materials, interfaces, branding and other customisation details to define the development scope.
03
Drawing & 3D Review
Drawings or 3D models can be prepared or reviewed where needed to confirm the product configuration before physical development.
04
Sample & Verification
A sample or prototype can be produced when physical confirmation is required before moving into bulk production.
05
Confirmed Production
Once the agreed product details are confirmed, production proceeds according to the approved configuration and order requirements.
06
Repeat Supply
Confirmed product information can be retained to support repeat orders, replacement components and long-term product continuity.
Not Every OEM Project Requires Every Step
Simple private-label projects may move directly from requirement confirmation to production, while new or modified products may require additional drawings, samples or technical review before approval.
ENGINEERING SUPPORT
Drawings & 3D Models Before Production
When a customised product needs further definition, drawings and 3D models can help both sides review dimensions, interfaces and product configuration before production.Make the Product Easier to Review Before It Is Made
APAC can use drawings and 3D modelling to communicate product concepts and customer-specific configurations during the development process. Depending on the project, this can help review:- Product dimensions
- Component configuration
- Fixing interfaces
- Product relationships within a system
- Customer-specific modifications
- Final appearance before sample development
START WITH THE RIGHT INFORMATION
What Should You Send for an OEM or ODM Enquiry?
You do not need to have every technical detail finalised before contacting us. The more useful information you can provide, however, the faster we can understand the development scope.
PRODUCT
Existing Product or Reference
Share product photos, an existing sample, product links or reference systems that help explain what you want to develop.
TECHNICAL
Drawings & Specifications
Send available CAD drawings, dimensions, material requirements, interface details or customer specifications.
MARKET
Application & Target Market
Tell us where the product will be sold or used, the intended application and any market-specific technical requirements that need to be considered.
Only Have an Idea or Reference Product?
Send us what you already have. We can first review whether the requirement is close to an existing APAC product or whether a customer-specific development route should be discussed.
BEYOND THE PRODUCT
Technical Materials to Support Your Product Range
For brands and distributors, developing the physical product is only one part of bringing an edge protection range to market.Installation Information
Installation guides can provide step-by-step product and component information to support correct system understanding and customer use.
Drawings & Models
Available drawings and 3D models can support product review, technical discussions and communication with your customers.
Product Information
Product specifications, images and other available technical resources can support your catalogue, website and local sales activity.
OEM REQUIREMENT CHECKLIST
Define What You Want to Change
OEM projects can be very simple or highly customised. A logo change may only need basic confirmation, while a new dimension, connection or product concept may require drawings, samples or additional technical review. This checklist gives you a practical starting point for showing us what you want to change and what information will help us review it.| Customisation Area | Typical Options | Information to Provide |
|---|---|---|
| Branding | Stickers, markings, spraying or agreed identification methods | Logo file, brand requirements and preferred position |
| Colour | Customer-specified RAL colour where applicable | Required RAL code and product or component |
| Dimensions | Customer-specific dimensions or product configuration | Drawing, dimensions, tolerance requirements and application |
| Product Development | Modification of an existing product or a customer-specific concept | Drawing, sample, reference product, application and target market |
| Technical Materials | Drawings, 3D models and installation information where available | Required format, intended use and product configuration |
Custom Changes Can Affect System Performance
A change may look small on a drawing but still affect how an edge protection system fits, connects or performs.
If dimensions, materials, components or fixing methods are changed, we will review the customised configuration against the technical information and evidence available for the original system.
Where testing or compliance documentation is required, we will help clarify what existing evidence can support and whether further verification may be needed for the customised version.
MORE BEHIND THE PRODUCT
See What Supports Your OEM Project
A customised product also depends on how it is manufactured, checked and supported with technical information. These pages show more of what happens behind the product itself.
Manufacturing & Quality
See how production, inspection and quality control are managed for project and repeat orders.
Certification
Review available testing, compliance and technical evidence for selected edge protection configurations.
Projects
See how APAC edge protection systems have been supplied and used on real construction projects.
FAQ
OEM & ODM Edge Protection FAQs
A few common questions we receive from brands, distributors and other companies developing their own edge protection range.Can APAC manufacture edge protection products under our own brand?
Yes. Private-label requirements can include your logo, stickers, markings, colours and other agreed product-identification methods. The most suitable option depends on the product and how you want your brand presented.Can you manufacture from our existing drawings or sample?
Yes. Drawings, dimensions, samples and reference products can all be used as a starting point. We may ask for additional information or prepare drawings for confirmation before a sample or production order moves forward.Can we choose a custom RAL colour?
Yes, for applicable powder-coated products. Send us the RAL code and tell us which components require the custom colour so we can review it with the rest of the order requirements.Can APAC provide 3D models for a customised product?
Yes, where 3D modelling is useful for the development process. It can help both sides review the product shape, connection details and system configuration before physical production begins.Does an existing test report automatically cover a customised product?
Not always. Changes to dimensions, materials, components or fixing methods can affect the configuration covered by existing technical evidence. We therefore review the customised version against the available documents rather than assuming the original evidence applies automatically.
START YOUR OEM PROJECT
Have a Product, Drawing or Idea You Want to Develop?
Send us what you already have. It can be a drawing, sample, product photo, specification or simply an application requirement. We can review the information first and help you decide the most practical route forward.