Material Check
Check the steel before production starts.
Excavation & Trench Edge Protection
Edge Protection Systems for Excavation & Trench
Temporary edge protection for trenches, excavations, sheet pile edges and other open groundworks areas.
APAC provides different guard and clamp systems for excavation work. The right system can be selected according to the excavation edge, fixing point and site conditions.
- Systems for trenches and sheet pile edges
- Clamp and guard options for different site conditions
- Barrier, post and fixing parts supplied as a complete system
Real System Configurations
Edge Protection Systems Developed Around Real Project Needs
The excavation has sheet piles, but the customer also needs flexibility when the protected length changes.
Safedge Sheet Pile Edge Protection System
- Conform to EN 13374 Standards
- Hot-dip galvanised surface treatment
- Prevent falls from height into excavations
Safedge Trench Guard Edge Protection System
- Simple, adjustable, reusable, suitable for both short-term and long-term projects.
- Toe board design prevents small debris from falling.
TG Sheet Pile Clamp Edge Protection System
- Optional clamp available.
- Panels can overlap to accommodate different lengths.
- Mesh design provides effective air circulation.
TG Trench Guard Edge Protection System
- Quick installation, saving labor and offering high cost-efficiency.
- Simple, adjustable clamping device.
- Panels available in lengths of 1.8m and 2.6m, with 90° or 120° bends.
Choose the Fixing Method
Start With the Excavation Edge
The first thing to check is what is available around the excavation.
If sheet piles are already installed, a clamp system may be suitable.
For other trench edges, a different guard or fixing arrangement may be needed.
| Fixing Method | Suitable For | Why Use It | Typical Use |
|---|---|---|---|
| Safedge Sheet Pile Clamp | Sheet pile excavations | Direct fixing to the sheet pile | Deep excavations and groundworks |
| Safedge Trench Guard | Open trenches | Simple reusable protection | Utility and general trenches |
| TG Sheet Pile Clamp | Sheet pile edges | Works with overlapping guard panels | Excavation perimeters |
| TG Trench Guard | Trenches and groundworks | Adjustable clamp and different panel lengths | Civil and utility work |
| Custom Excavation Attachment | Special edge conditions | Designed around the actual fixing point | Special projects and OEM systems |
Have a Different Excavation Condition?
Send us your site photo, drawing or excavation details.
We can review the edge condition and help you choose a suitable edge protection system.
Technical Specifications
Check the System Before Ordering
APAC mesh barriers are available in different sizes, configurations and finishes to suit a wide range of temporary edge protection applications.
| Item | Specification |
|---|---|
| Material | Steel |
| Size | 1.3 m / 2.6 m / 2.9 m / Custom |
| Finish | Galvanized + Powder Coated |
| Colour | Yellow / Custom RAL |
| Type | Mesh Barrier / Extension Barrier |
| Configuration | Standard / 90° / 120° |
| Application | Temporary Edge Protection |
| OEM | Available |
| Logo | Custom Logo Available |
| Packing | Stillage / Pallet |
| Custom Size | Available |
| Technical Documents | Available on Request |
Applications
Common Excavation Edge Protection Applications
Excavation work can appear in many types of construction projects.
The right edge protection system depends mainly on how the excavation is supported and what fixing points are available.
Trenches
Temporary protection around open trenches used for utilities, drainage, and other groundworks.
Sheet Pile Excavations
Edge protection fixed directly to sheet piles around supported excavations.
Deep Excavations
Temporary protection around deep excavation areas where workers may be exposed to open edges.
Installation Process
Keep Installation Simple
The installation method depends on the selected trench guard or sheet pile clamp system.
-
Check the Excavation Edge
Confirm the edge condition and approved fixing position.
-
Install the Clamp or Guard
Fit the selected clamp or trench guard system.
-
Install the Post
Where a separate post is used, place the post into the attachment and secure it.
-
Install the Barrier
Fit the mesh barrier or guard panel into position.
-
Check Corners and Gaps
Make sure corners, short sections and changes in direction are protected.
-
Final Check
Check the complete system before work continues around the excavation.
OEM & Private Label
Adjust the System to Your Product Range
Excavation edge protection does not always use the same panel, clamp or fixing method.
For distributors, rental companies and edge protection brands, we can review existing products or new requirements and discuss suitable changes.
Product Dimensions
Selected panel, clamp or connection dimensions can be reviewed according to the application.
Clamp Design
Clamps can be developed around different sheet pile or fixing conditions where suitable.
Surface Finish
Available options may include:
- Hot-dip galvanizing
- Zinc coating
- Powder coating
- Painted finish
Colour & Branding
We can support:
- Selected RAL colours
- Product labels
- Logo plates
- Packing marks
- Custom packaging
Manufacturing & Quality
Consistent Parts for a Better System Fit
An excavation edge protection system works better when the barrier, post and clamp fit together correctly.
APAC checks the main dimensions and connection points during production to help reduce fitting problems during installation and reuse.
Cutting
Cut tubes, plates and mesh parts to the required size.
Forming
Bend and form parts according to the drawing.
Welding
Check the weld position and main dimensions during welding.
Dimension Check
Measure key areas such as clamp openings and post connections.
Surface Treatment
Apply the required galvanizing, coating or paint finish.
Assembly Check
Fit the clamp, post and barrier together to check the main connections.
Final Inspection
Check dimensions, appearance and quantity before packing.
Packing
Pack the barriers, posts, clamps and accessories according to the order.
Shipment Check
Confirm quantities, labels and shipping marks before loading.
Packaging & Delivery
Packaging That Makes Handling Easier
Excavation systems can contain large guard panels as well as smaller clamps and connection parts.
Good packing should make them easier to count, unload, store and move after delivery.
Mixed System Orders
Sheet pile clamps, trench guards and other parts can be packed in the same shipment according to the agreed product list.
Container Loading
We consider the packing size and loading arrangement together to make better use of container space.
From Sample to Bulk Order
Whether you need samples, a trial order or a full shipment, we follow the order through packing and delivery.
Who We Work With
Different Customers Need Different Excavation Systems
Edge Protection Brands
For companies that want to add excavation and trench systems to an existing edge protection range.
We can support OEM products, private labels and attachment development.
Specialist Distributors & Agents
For companies supplying temporary safety products to civil, groundworks and construction contractors.
Different excavation systems can help cover more site conditions.
Rental & Hire Companies
For rental companies that need products that can be installed, removed, and used again on different projects.
Simple parts and clear system combinations can also make stock management easier.
Groundworks & Civil Contractors
For contractors that need temporary protection around trenches, sheet piles and other open excavation areas.
Project Evidence
Projects From Real Constructure Projects
Browse selected edge protection references from Singapore, Malaysia, the United States, Australia, and New Zealand. Additional projects will be added as this case-study library grows.
Concrete Slab
Affin Bank Edge Protection Project
Edge protection reference for the 47-storey Affin Bank headquarters development at Tun Razak Exchange in Malaysia.
Concrete Frame
Auckland Edge Protection Project
Temporary edge protection project reference in Auckland, New Zealand, using a modular edge protection configuration for the site.
Bridge
Flinders Link Project
APAC supplied a clamp-based edge protection system for the Flinders Link Project, reducing drilling and supporting fast, reusable bridge protection.
Technical Support
More Information Before You Choose
If you need more information before selecting the system, you can review our technical resources.
EN 13374 Vs. AS/NZS 4994.1: Key Differences for Buyers
EN 13374 vs. AS/NZS 4994.1: Key Differences for Buyers Temporary edge protection systems may look similar across different constru…
12 min read
Read Article →
How to Choose the Right Edge Protection System for Your Project
Introduction Choosing an edge protection system is not just about buying barriers, posts, or guardrails. For contractors, rental c…
10 min read
Read Article →
BS EN 13374:2025 – Updated Standard for Edge Protection
Learn what’s changed from the 2013+A1:2018 version and how it affects scaffold manufacturers, contractors.
5 min read
Read Article →
Related Products
Continue Exploring the System
Related Components
Related Applications
FAQ
Excavation Edge Protection FAQ
Which system should I use for a trench?
It depends on the trench edge, ground condition and available fixing point.
A trench guard system may be suitable where there is no sheet pile fixing point.
Which system should I use for sheet piles?
A sheet pile clamp system can be used where the clamp matches the sheet pile and fixing condition.
Send us the sheet pile details or a site photo and we can help check the option.
Can the panels overlap?
Some TG sheet pile guard panels can overlap to help adjust the protected length.
The actual panel arrangement should be confirmed for the selected system.
Do the trench guards have toe boards?
Some trench guard systems include a lower toe board section to help reduce small materials falling into the excavation.
What panel sizes are available?
For some TG trench guard systems, 1.8 m and 2.6 m panel lengths are available.
Other sizes depend on the selected product.
Start With the Excavation Edge
Send Us Your Site Photo or Drawing
You do not need to choose the system before contacting us.
Send us the excavation type, sheet pile details, drawing or site photo.
We can check the fixing condition and discuss a suitable system with you.
What Happens Next?
01 · Send the Site Information
02 · Check the Edge Condition
03 · Confirm the System
04 · Prepare the Order