TESTING · COMPLIANCE · TECHNICAL EVIDENCE

Edge Protection Testing, Certification & Compliance Documents

Review the test, inspection and technical documents used to support APAC temporary edge protection systems for different markets and project requirements.

Compliance should be evaluated against the actual system configuration, including the barrier, safety post, attachment, fixing method and supporting structure. APAC can help buyers identify the relevant documents for the product, market and project being reviewed rather than relying on a certificate image alone.
Edge Protection Testing
AVAILABLE EVIDENCE

Edge Protection Documents Available for Review

The documents below represent different types of technical evidence. Each one should be read according to its stated product, standard edition, test scope and system configuration.
THIRD-PARTY DOCUMENT

EN 13374:2025 Technical Inspection Attestation

Technical Inspection Attestation of Conformity issued in 2026 for APAC Builders Equipment Co., Ltd. Standard Reference: EN 13374:2025 Product: Edge Protection System Model / Type: Edge Protection Barrier Certificate No.: M.2026.206.C137667 This document should be reviewed together with the exact product configuration and other supporting technical information.
View Document
IN-HOUSE TEST RECORD

EN 13374 Class A Static Test Record

APAC internal engineering test record completed in February 2015 for defined temporary edge protection configurations. Standard Reference: EN 13374:2004 Class: Class A Testing: Horizontal, parallel and accidental vertical loading The report records the test setup, applied loads, measurements and test results for the configuration assessed at that time. This is historical in-house engineering evidence and should not be treated as current third-party certification.
View Test Record

Need Documents for Supplier Approval or a Project Submittal?

Tell us the system, target market and documents your customer, consultant or project team requires. We can review which test, product and inspection information is available for that configuration.
UNDERSTANDING THE EVIDENCE

Not Every Technical Document Proves the Same Thing

A certificate, test record, drawing and production inspection report answer different questions. Buyers should understand what each document actually covers before using it for supplier or project approval.
Evidence What It Shows Important Boundary
Third-Party Attestation An external document relating to the product, standard or assessment scope stated on that document. The exact product, scope and supporting evidence should still be checked.
Product Test Record Records how a particular product or system configuration was tested and the results obtained. Results apply to the configuration and conditions covered by that test.
Product Drawing Shows dimensions, connections and other product details for the specified version. The drawing revision should match the product being purchased.
Inspection Record Records selected dimensional, workmanship, surface, assembly or shipment checks. It applies to the inspected production, batch or shipment scope.
Installation Information Explains the intended combination and installation method for a defined system. Actual site conditions and supporting structures still need to be checked.
TESTING PROCESS

Inside an Edge Protection Load Test

The historical APAC Class A test record shows how loads were applied to defined temporary edge protection configurations and how movement and product behaviour were recorded.
01

Define the System

Confirm the barrier, safety post, attachment, dimensions, spacing and supporting structure being assessed.
02

Apply the Load

Test loads are applied at defined positions according to the selected test method and system class.
03

Measure the Response

Deflection, movement and visible product behaviour are measured and recorded during the test.
04

Review the Result

The recorded result is reviewed against the criteria and conditions applicable to that test.

See the Test Process, Not Just the Final Document

A useful technical review looks at how the system was configured, where the loads were applied, what was measured and which products were included in the assessment. Test videos and additional records can be reviewed where available for the selected product or system.
APAC edge protection system testing
SYSTEM CONFIGURATION

A Test Report Belongs to a Defined Configuration

Edge protection works as a system. Changing one component or fixing condition can affect whether existing test evidence remains relevant.
01

Barrier

Barrier design, dimensions and connection details form part of the system being reviewed.
02

Safety Post

Post type, height and connection arrangement can affect the complete system behaviour.
03

Attachment

Clamp, socket, base or other fixing component should match the tested or reviewed configuration.
04

Structure & Spacing

Post spacing, fixing position and supporting structure are important parts of the assessment.
05

Match the Evidence

The purchased system should be checked against the exact scope and configuration covered by the available documentation.

Changing a Component Can Change the Technical Review

Replacing the barrier, post, attachment, spacing or supporting structure with a different configuration should not automatically be treated as covered by the same document.
STANDARDS BY MARKET

Understanding Edge Protection Requirements by Market

Different markets use different standards and regulatory frameworks. Buyers should confirm the applicable requirement together with the exact system configuration before placing an order.
The references below provide a starting point for identifying the relevant technical framework for temporary edge protection and guardrail systems.
Market Reference Main Purpose What to Confirm With APAC
United Kingdom / Europe BS EN 13374:2025 Temporary edge protection system requirements, classifications and test methods. Tested system, class, fixing configuration, application and report edition.
Australia / New Zealand AS/NZS 4994.1:2023 General requirements for temporary edge protection. Product configuration, intended application, fixing method and applicable test documentation.
United States OSHA 1926.502 Construction fall protection system and guardrail criteria. Guardrail configuration and applicable project or site requirements.
United Kingdom HSE Work at Height Guidance Guidance for planning and controlling work-at-height risks. Suitable protection and installation method for the intended work and site condition.
Middle East Local regulations, project specifications, consultant requirements and specified international standards Requirements may vary by country, client, consultant and project type. Applicable standard, fixing method, system configuration, test evidence and technical submittal requirements.
Central Asia Local regulations, project specifications, client requirements and specified technical standards Technical and safety requirements can vary between countries and individual projects. Required standard, structural conditions, fixing method, product configuration and supporting technical documents.
PROCUREMENT REVIEW

Technical Information Buyers May Need Before Approval

Supplier approval normally involves more than one certificate. The document package should help the buyer understand the actual product, system configuration, manufacturing requirement and intended installation.
Document / Information Why Buyers Request It APAC Support
Product Drawing Confirm dimensions, materials and connection details. Product drawings can be prepared or reviewed for the confirmed product.
System Configuration Confirm which barrier, post and attachment form the proposed system. Help identify the complete component combination for review.
Applicable Test Evidence Review technical evidence relevant to the specified product and market. Review available evidence against the requested configuration.
Material Information Confirm specified steel, material or product construction requirements. Material requirements can be reviewed before production.
Surface Finish Confirm galvanizing, coating or other finish requirements. Surface treatment requirements can be included in the purchase specification.
Installation Information Review the intended fixing and component installation method. Installation information can be provided for confirmed systems where available.
Inspection Records Review selected product or production checks before shipment. Relevant inspection information can be prepared according to the order requirements.
Packing Information Support freight, handling and delivery planning. Packing quantities, stillages and loading information can be reviewed before shipment.

The Required Package Depends on the Project

Not every document applies to every product. The correct package depends on the target market, product configuration, customer approval process and project specification.
DIFFERENT BUYERS · DIFFERENT EVIDENCE

Technical Requirements Depend on How You Buy and Use the System

Contractors, rental companies, distributors and private-label brands often need different information from the same supplier.

Rental & Hire Companies

Product dimensions, material details, durability, replacement compatibility and inspection information.
Edge Protection for Rental

Edge Protection Brands

Approved drawings, sample records, revision control, test requirements and repeat-production specifications.
Edge Protection for Brands
BEFORE USING A TEST DOCUMENT

Check What the Document Actually Covers

Technical evidence is most useful when the buyer can clearly identify the product, system configuration, standard edition and scope covered by the document.

Important Technical Boundary

A standard number, attestation or test record should not be treated as blanket approval for every possible APAC edge protection configuration. Technical evidence applies to the products, fixing method, configuration and conditions covered by that document. Different posts, barriers, attachments, spacing, supporting structures or installation methods may require further review. Final system selection and site use should always be checked against the project specification and applicable local requirements.

Need Us to Match the Documents to Your Product?

Send the product, system configuration, target market and document requirements. We can review which available evidence is relevant to your procurement or project review.
MORE SUPPLIER EVIDENCE

Go Beyond the Certificate

Test and inspection documents are only one part of supplier evaluation. Manufacturing control, repeat-production capability and real project experience provide additional evidence when selecting a long-term edge protection supplier.
apac edge protection factory - mission

Manufacturing & Quality

Review how APAC manages production, inspection and quality checks from confirmed requirements through shipment.

View Manufacturing & Quality

Projects

Explore selected international edge protection projects and the system configurations used on site.

View Projects
APAC-edge-protection-system-OEMODM

OEM / ODM Ability

Review APAC support for drawings, samples, product development, private label and repeat OEM supply.

View OEM / ODM Ability
FAQ

Edge Protection Certification & Testing FAQs

What EN 13374 documentation does APAC currently have available?APAC currently has an EN 13374:2025 Technical Inspection Attestation for the stated edge protection product and a historical in-house Class A static test record prepared against EN 13374:2004. The relevance of each document should be reviewed against the actual product and system configuration being purchased.
Is the 2015 EN 13374 test record a third-party certification?No. It is an APAC in-house engineering test record and should be treated as historical internal test evidence rather than third-party certification.
Does one EN 13374 document cover every APAC edge protection system?No. Different barriers, posts, attachments, spacing, fixing methods and supporting structures can create different system configurations. The product being purchased should be checked against the scope of the relevant document.
Which version of EN 13374 should buyers check?Buyers should check the standard edition required by the current project and also confirm the exact edition referenced by the available test or inspection document. Historical reports should retain their original standard edition rather than being relabelled as a later version.
Can APAC support additional testing for a customer-specific system?Additional testing or inspection requirements can be discussed for OEM products, customer-specific configurations and project requirements. The product configuration, test scope, applicable standard and responsible testing organization should be confirmed before testing begins.
What technical documents should we request before placing an order?The package depends on the product and market, but buyers may need product drawings, system configuration information, applicable test evidence, installation information, inspection records and packing details.

Need Technical Documents for Supplier Approval or Project Review?

Tell us the edge protection system, target market, project requirement and documents you need. APAC can review the request and confirm the available test, product, inspection and technical information.